Extron electronic DMP 64 manual HTML Operation, Download the Startup Page

HTML Operation

This section describes HTML operation and control of the DMP 64, including:

•Download the Startup Page

•Status Tab

•Configuration Tab

•File Management Tab

•Control Tab

•Special Characters

The DMP 64 can be controlled and operated through its Ethernet port, connected by LAN or WAN, using a web browser such as the Microsoft® Internet Explorer. The browser display of device status or operation has the appearance of web pages. This chapter describes the factory-installed HTML pages, which are always available and cannot be erased or overwritten.

NOTE: If the Ethernet connection to the device is unstable, try turning off the proxy server in the Web browser. In Microsoft Internet Explorer, click

Tools > Internet Options > Connections > LAN Settings, uncheck the "Use a proxy server..." box, and then click OK.

Download the Startup Page

Access the device using HTML pages as follows:

1.Start the Web browser program.

2.Click in the browser Address field.

3.Enter the device IP address directly into the Address field.

NOTE: If the local system administrators have not changed the value, the factory‑specified default IP address is 192.168.254.254.

4.If a custom display page is available, enter a slash (/) and the file name to open.

NOTE: The browser Address field should display the address in the following format: xxx.xxx.xxx.xxx/{optional_file_name.HTML}. The following characters are invalid in file names:

{space} + ~ , @ = ‘ [ ] { } < > ’ " ; : > \ ?

DMP 64 • HTML Operation 120