Extron electronic DMP 64 Deleting a Group Master, Viewing and Using a Group Master, Add a Group

Deleting a Group Master

To delete a group:

1.Click Tools > Configure Groups to open the configure groups dialog box or click View > Group Controls and then click Add a Group.

2.In the Select Group drop-down box, click a numbered group (such as "Group #1") to select it.

3.Click the Delete Current Group button in the lower left area.

4.Click Yes in the Confirm Deletion dialog box.

Viewing and Using a Group Master

Click View > Group Controls to open the group controls dialog box (see figure 49). The group controls dialog contains two menu items:

•Add a Group allows you to add additional groups.

•Tools enable you to perform various functions from the group controls window.

In addition, once groups are created, a single mute button or a group fader plus the current setting readout and any soft limits that have been set are visible.

Figure 49. Group Controls Dialog Box

The group fader controls function as follows:

•Slide a group fader up and down to adjust all gain controls in the group.

•Click and drag a soft limit () to set the ceiling and floor for the group.

NOTE: Soft limits cannot be dragged beyond the current setting of the group fader.

Add a Group

To launch the configure groups dialog from the group controls window, click

Add a Group. When a new group is added and the Add New Group dialog is closed, the group controls window refreshes to display the added control.

NOTE: If a block is muted when the group mute is selected, that block remains muted when the group mute is released.

DMP 64 • Software Control 72