Extron electronic DMP 64 manual EX1,X1!NG

EZQQQ}

Similar to System Reset,

plus sets the IP address to 192.168.254.254

and the subnet mask to 255.255.0.0.

Zpq]

EZY}

Zpy]

Command and Response table for basic SIS commands (continued)

Command	ASCII command	Response	Additional description
	(host to device)	(device to host)
Presets, I/O Names
Write preset name	EX1),X1!NG}	NmgX1),X1!]
Example:	E1,Security1NG}	Nmg01,Security1]	Name preset 1 “Security 1”
Read preset name	EX1)NG}	X1!]
Example:	E2NG}	Security2]
Recall a preset	X1).	RprX1)]	Command character is a
			period.
Example	5.	RprX1)]	Recall preset 5, which
			becomes the current
			configuration.
Write input name	EX#,X1!NI}	NmiX#,X1!]
Example:	E9,Podium cam1NI}	Nmi09,Podium cam1]	Name input 9 “Podium cam1”
Read input name	EX#NI}	X1!]
Write output name	EX@,X1!NO}	NmoX@,X1!]
Example:	E1,Main PJ1NO}	Nmo01,Main PJ1]	Name output 1 “Main PJ1”
Read output name	EX@NO}	X1!]
Resets
Reset presets and names	EZG}	Zpg]	Clear all presets and their
			names.
Reset an individual preset	EX1)ZG}	ZpgX1)]	Clear preset X1).
Reset a group	EZX2)GRPM}	GrpmZX2)]	Delete all members from
			group X2), reset parameters
			and soft limits.

NOTE: See Group Masters on page 69, for more information about audio group masters.

Reset flash	EZFFF}	Zpf]	Reset flash memory
			(erase user-supplied files).
System Reset (factory	EZXXX}	Zpx]	Resets all processors, level
defaults)			controls and mixers to default.

Reset all device settings and delete files

NOTE: This reset excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and port mapping (telnet/web/direct access) in order to preserve communication with the device.

This reset is recommended after a firmware update. Absolute reset

NOTES: X# = Input number		01 – 06
X@ = Output number		01 – 04
X1)	= Preset #	32 maximum (0 = current configuration)
X1! = Name		12 characters maximum
X2)	= Group master group number	01 – 32

DMP 64 • SIS Programming and Control 102