Extron electronic DMP 64 manual Configuration Tab, System Settings Page, IP Settings Fields

Configuration Tab

System Settings Page

Click the Configuration tab to download the System Settings page (see figure 64). The screen consists of fields to view and edit IP administration and system settings. Passwords and Firmware Upgrade pages are accessed by clicking the appropriate link on the left. For basic information about IP addresses and subnetting, see Ethernet (LAN) Port on page 93.

Figure 64. System Settings Page

On password-protected connections, there are two levels of protection: administrator and user. Administrators have full access to the Passwords and Firmware Upgrade pages. Users have view only access.

•Ethernet connection to the device, either entering SIS commands (see SIS Programming and Control on page 92), or using the Extron DSP Configurator Program (see DMP Software on page 14), is password-protected.

•Connection via any RS-232 port is not password-protected.

IP Settings Fields

The IP settings fields provide a location for viewing and editing settings unique to the Ethernet interface. After editing any of the settings on this page, click the Submit button at the bottom of the section to make the changes.

Unit Name Field

The Unit Name field contains the name of the device. This name field can be changed to any valid name, up to 24 alphanumeric characters.

NOTE: The following characters are invalid in the matrix name: + ~ , @ = ‘ [ ] { } < > ’ " ; : > \ and ?.

DMP 64 • HTML Operation 123