CBM America iDP3240 manual Esc S

ESC S

[Function]	Selecting STANDARD MODE
[Code]	<1B>H<53>H
[Outline]	Switches from PAGE MODE to STANDARD MODE.
[Caution]	• This command is only effective if it is entered when in PAGE
	MODE.
	• Any data mapped in PAGE MODE is erased.
	• After this command is executed, the beginning of the line is
	taken as the next print start position.
	• The print area defined by ESC W is initialized.
	• The commands listed below, which have separate settings for
	STANDARD MODE and PAGE MODE, are changed to the
	settings for STANDARD MODE use.
	(1) Spacing setting:	ESC SP
	(2) Line feed width setting: ESC 2, ESC 3
	• STANDARD MODE is selected when the printer is turned on
	or reset, or when ESC @ is executed.
[See Also]	FF, ESC FF, ESC L

— 81 —