CDA DV 770 manual Using The Oven Manually, Cancelling a Set Programme

23

Using The Oven Manually

Turn the oven ON as indicated in the “TURNING THE OVEN ON AND OFF” chapter.

Operate the oven manually by selecting the oven function and temperature as indicated in the “SELECTING THE COOKING FUNCTIONS” and “SELECTING THE TEMPERATURE” chapters. The oven will start to operate about four seconds after your last selection.

If “A” symbol is shown on the clock/programmer display (semi-automatic or automatic cooking selected), then you need to cancel the preset automatic cooking as indicated in the “CANCELLING A SET PROGRAMME” chapter.

Turn OFF the oven as indicated in the “TURNING THE OVEN ON AND OFF” chapter.

Cancelling a Set Programme

To cancel a set programme (“A” symbol activated on the programmer display):

–Select “dur” on the programmer display by touching the key “” and then touch “” or “” key. You should read “000'” on the clock/programmer display.

–A set programme is also cancelled when the oven is switched OFF in the “stand-by” mode. At the next power up the oven is not programmed.

IMPORTANT: If the oven is ON, remember to switch it off manually otherwise it does not stop operating in the set mode.