CDA DV 770 manual Installation C By Using Housing Unit figs

Models: DV 770

1 48
Download 48 pages 22.31 Kb
Page 38
Image 38
Installation "C" By Using Housing Unit (figs. 33, 34, 35)

38

Installation "C" By Using Housing Unit (figs. 33, 34, 35)

Remove the single oven shelf, if fitted, as indicated in figure 33.

Remove the upper cross member support as indicated in figure 34.

Cut the bottom of the housing as indicated in figure 34.

Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as indicated in figure 35.

Check the position of the cabinet legs to ensure the cut-out does not interfere with the legs support. Otherwise the cabinet may have to be removed as in INSTALLATION TYPE "B".

Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as indicated in Figs. 35).

Build in the double oven making it slide on the metal supports “B”.

Page 38
Image 38
CDA DV 770 manual Installation C By Using Housing Unit figs