Celestron CR-150 HD instruction manual Latitude Scales, Astronomy Basics

Models: CR-150 HD

1 59
Download 59 pages 47.13 Kb
Page 32
Image 32
Latitude Scales

Latitude Scales

The easiest way to polar align a telescope is with a latitude scale. Unlike other methods that require you to find the celestial pole by identifying certain stars near it, this method works off of a known constant (your latitude) to determine how high the polar axis should be pointed. The latitude range varies depending upon the telescope you own. The range for the CG-5 is 40°.

The constant, mentioned above, is a relationship between your latitude and the angular distance the celestial pole is above the northern (or southern) horizon. The angular distance from the northern horizon to the north celestial pole is always equal to your latitude. To illustrate this, imagine that you are standing on the north pole, latitude +90°. The north celestial pole, which has a declina- tion of +90°, would be directly overhead (i.e., 90 above the horizon). Now let’s say that you move one degree south. Your latitude is now +89° and the celestial pole is no longer directly overhead. It has moved one degree closer toward the northern horizon. This means the pole is now 89° above the northern horizon. If you move one degree further south, the same thing happens again. As you can see from this example, the distance from the northern horizon to the celestial pole is always equal to your latitude.

If you are observing from Los Angeles, which has a latitude of 34°, then the celestial pole would be 34° above the northern horizon. All a latitude scale does then is to point the polar axis of the telescope at the right elevation above the northern (or southern) horizon. To align your telescope:

1.Point your telescope due north. Use a landmark that you know faces north.

2.Level the tripod by raising or lowering the legs as needed. There is a bubble level built into the tripod of the CG-5 mount for this purpose.

3.Adjust the telescope mount in altitude until the latitude indicator (see figure 5-6) points to your latitude.

This method can be done in daylight, thus eliminating the need to fumble around in the dark. Although this method does NOT put you directly on the pole, it will limit the number of corrections needed when tracking an object. It will also be accurate enough for short exposure prime focus planetary photog- raphy (a couple of seconds) and short exposure piggyback astrophotography.

Latitude Scale

Figure 5-6

32 • Astronomy Basics

Page 32
Image 32
Celestron CR-150 HD instruction manual Latitude Scales, Astronomy Basics