Polar Alignment Finders
There are two finders specifically designed for polar alignment that can be used with the
The second finder is the polar axis finderscope (#94221). Its sole purpose is polar alignment and can NOT be used to find objects in the telescope. Both these finders work on the same principle, but their methods of operation are slightly different. These methods are generally easier than those already described and they are fairly accurate. For more information on both these finderscopes, refer to the Optional Accessories section of this manual or ask for the Celestron accessory catalog (#93685).
Aligning the R.A.
Setting Circle
Before you can use the setting circles to find objects in the sky you need to align the R.A. setting circle. The declination setting circle is aligned during the polar alignment process. In order to align the R.A. setting circle you will need to know the names of a few of the brightest stars in the sky . If you don’t, they can be learned by using the Celestron Sky Maps (#93722) or consulting a current astronomy magazine. To align the R.A. setting circle:
1.Locate a bright star near the celestial equator. The farther you are from the celestial pole the better your reading on the R.A. setting circle will be. The star you choose to align the setting circle with should be a bright one whose coordinates are known and easy to look up. (For a list of bright stars to align the R.A. setting circle, see the list at the back of this manual.)
2.Center the star in the finder.
3.Look through the main telescope and see if the star is in the field. If not, find it and center it.
4.Start the optional motor drive so that it will track the star. If you are not using a motor drive the star will start to drift out of the field and you will need to center it again before setting the R.A. circle.
5.Look up the coordinates of the star.
6.Rotate the circle until the proper coordinates line up with the R.A. indicator (the zero mark on the vernier scale). The R.A. setting circle should rotate freely.
As mentioned above, the declination setting circle is aligned during the pro- cess of polar alignment. There is no need to align it in the same manner as the R.A. setting circle.
Once you have finished this process you are ready to use the setting circles to locate objects in the night sky. See the section on “Using the Setting Circles” for specific information.
Astronomy Basics • 35
