Manuals / CFM Corporation / Outdoor Cooking / Smoker

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Tools needed, Crimp

Models: 3405BG

1 28

Download 28 pages 36.26 Kb

Page 15

Crimp

Assembly Step 11

Locate these parts:	Hardware Bag	G

Zip Tie	S-Hook

Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just loose enough so the hose can be adjusted if needed.

Tying the hose to the leg helps prevent the hose from coming into contact with the hot burner chamber. Inspect the installation underneath the smoker to ensure the hose is not rubbing any position of the burner cham- ber.

Tools needed:

Pliers

Crimp

OR

1.Place one end of the S-hook around the regulator neck or through the eyelet as shown.

2.Using a set of pliers, crimp the S- hook securely to the HVR so it can not be removed from the HVR.

3.When the LP tank is not at- tached to the smoker, use the S-hook to hang the HVR from the carry handle on the side of the smoker. This will help prevent dirt and other par- ticles from plugging the end of the HVR.

Assembly is now complete! Please follow all instructions and safeguards on the following pages for connecting the LP tank.

15

Image 15

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Tools needed, Crimp

Contents

CONSUMER / USER Assembly and Owner’s ManualASSEMBLER / INSTALLER Gas SmokerContinued READ ALL INSTRUCTIONS AND WARNINGSOPERATING YOUR SMOKER USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR SMOKERREAD ALL INSTRUCTIONS, WARNINGS AND SAFEGUARDS BEFORE ASSEMBLING AND SAVE THESE INSTRUCTIONSAssembly Step 1 - Identifying the parts DO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRSTtoll-free customer service line to order parts Identifying the parts - Continued DO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRSTLP tank and ﬂavoring wood not included Tools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts Hardware1. Insert the wood box rack into the bottom of the smoker Assembly StepLocate these parts No tools or hardware are required for this stepAssembly Step Locate these partsWater Pan Cooking Grids 1. Slide the handle washer onto the end of the door handle, followed by the handle spring Assembly StepLocate these parts Tools neededHardware Bag Assembly Step2 Push Nuts Nameplate w/Heat Indicator Locate these partsCrimp Assembly StepLocate these parts Tools neededConnecting the LP Tank ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BEFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY Checking for Leaks Connecting the LP Tank - ContinuedALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURYCooking Tip Pre-Use ProceduresOperating Instructions Adding WaterCooking Tips - Flavoring Wood Adding Wood / CharcoalMatch Lighting Lighting Procedure Ignitor Lighting SystemCooking Tip - Damper Adjustments Shutting the Smoker OFFCooking Instructions You Are Now Ready to Begin Temperature Chart Here is a chart for measuring properly cooked meat temperatureUSDA Standard Care and Maintenance After Use Safety and MaintenanceMonday - Friday, 900 a.m. - 500 p.m. EST Manufacturer’s Limited WarrantyPage “there’s nothing like the great outdoors.” Statement of CommitmentCFM Corporation Patents Pending USA2695 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 8A3