Manuals / CFM Corporation / Outdoor Cooking / Smoker

CFM Corporation 3405BG Assembly Step, Locate these parts, Tools needed, Hardware Bag B

Models: 3405BG

1 28

Download 28 pages 36.26 Kb

Page 8

Image 8

Assembly Step 4

Locate these parts:

Burner Assembly

Hardware:	Hardware Bag B

1/4-20 x 1/2” Bolts

3required

1.Set the burner assembly onto the cabinet as shown. IMPORTANT: The burner tube must slide properly onto the valve stem as shown below.

2.Secure the burner assembly with the three (3) bolts from inside the cabinet. Securely tighten the bolts.

3.Attach the loose ignitor wire to the ignitor on the control panel as shown.

Tools needed:

Phillips head screwdriver

Page 8

Image 8

CFM Corporation 3405BG Assembly Step, Locate these parts, Tools needed, Hardware Bag B, 1/4-20 x 1/2” Bolts 3 required

Contents

Assembly and Owner’s Manual ASSEMBLER / INSTALLERGas Smoker CONSUMER / USERREAD ALL INSTRUCTIONS AND WARNINGS ContinuedUSE CAUTION AND COMMON SENSE WHEN OPERATING YOUR SMOKER READ ALL INSTRUCTIONS, WARNINGS AND SAFEGUARDS BEFORE ASSEMBLING ANDSAVE THESE INSTRUCTIONS OPERATING YOUR SMOKERtoll-free customer service line to order parts Assembly Step 1 - Identifying the partsDO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST LP tank and ﬂavoring wood not included Identifying the parts - ContinuedDO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST Assembly Step Locate these partsHardware Tools neededAssembly Step Locate these partsHardware Tools neededAssembly Step Locate these partsHardware Tools neededAssembly Step Locate these partsHardware Tools neededAssembly Step Locate these partsHardware Tools neededAssembly Step Locate these partsNo tools or hardware are required for this step 1. Insert the wood box rack into the bottom of the smokerWater Pan Cooking Grids Assembly StepLocate these parts Assembly Step Locate these partsTools needed 1. Slide the handle washer onto the end of the door handle, followed by the handle springAssembly Step 2 Push Nuts Nameplate w/Heat IndicatorLocate these parts Hardware BagAssembly Step Locate these partsTools needed CrimpFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY Connecting the LP TankALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE Connecting the LP Tank - Continued ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BEFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY Checking for LeaksPre-Use Procedures Operating InstructionsAdding Water Cooking TipAdding Wood / Charcoal Cooking Tips - Flavoring WoodLighting Procedure Ignitor Lighting System Match LightingShutting the Smoker OFF Cooking Tip - Damper AdjustmentsCooking Instructions You Are Now Ready to Begin USDA Standard Temperature ChartHere is a chart for measuring properly cooked meat temperature After Use Safety and Maintenance Care and MaintenanceManufacturer’s Limited Warranty Monday - Friday, 900 a.m. - 500 p.m. ESTPage Statement of Commitment “there’s nothing like the great outdoors.”2695 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 8A3 CFM CorporationPatents Pending USA