CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Hardware, Tools needed

Assembly Step 6

Locate these parts:

2 Carry Handles

Hardware: Hardware Bag D

1/4 Lock Washers

1/4-20 Nuts8 required1/4-20 x 5/8” Bolt 8 required

8 required

1.Align the carry handle with the corresponding holes on the side of the cabinet. The handles must be positioned upright with the bolt holes on the bottom.

2.Insert the bolts from the outside and thread the lock washers and nuts from inside the cabinet.

3.Firmly tighten the nuts.

4.Complete steps for both sides of the cabinet as- sembly.

Tools needed:

Phillips head screwdriver

1/2” Wrench

10