Manuals / CFM Corporation / Outdoor Cooking / Smoker

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Tools needed

Models: 3405BG

1 28

Download 28 pages 36.26 Kb

Page 13

Image 13

1.Slide the handle washer onto the end of the door handle, followed by the handle spring.

Assembly Step 9

Locate these parts:

Door Handle Kit

Handle Spring

Handle Washer

Hardware Bag E

Mounting

Bracket

1/4-20 x 3/8” Bolts 1/4-20 Lock Washers (2 ea)

Tools needed:

Phillips head screwdriver

1.Slide the handle washer onto the end of the door handle, followed by the handle spring.

2.Feed the door handle into the hole through the front of the door panel.

3.From the back side of the door panel, insert the mounting bracket over the end of the handle.

4.With lock washers placed on the bolts, insert the bolts through the mounting plate, into the pre- threaded mounts and ﬁrmly tighten the bolts.

Page 13

Image 13

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Tools needed

Contents

ASSEMBLER / INSTALLER Assembly and Owner’s ManualGas Smoker CONSUMER / USERContinued READ ALL INSTRUCTIONS AND WARNINGSREAD ALL INSTRUCTIONS, WARNINGS AND SAFEGUARDS BEFORE ASSEMBLING AND USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR SMOKERSAVE THESE INSTRUCTIONS OPERATING YOUR SMOKERDO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST Assembly Step 1 - Identifying the partstoll-free customer service line to order parts DO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST Identifying the parts - ContinuedLP tank and ﬂavoring wood not included Locate these parts Assembly StepHardware Tools neededLocate these parts Assembly StepHardware Tools neededLocate these parts Assembly StepHardware Tools neededLocate these parts Assembly StepHardware Tools neededLocate these parts Assembly StepHardware Tools neededLocate these parts Assembly StepNo tools or hardware are required for this step 1. Insert the wood box rack into the bottom of the smokerLocate these parts Assembly StepWater Pan Cooking Grids Locate these parts Assembly StepTools needed 1. Slide the handle washer onto the end of the door handle, followed by the handle spring2 Push Nuts Nameplate w/Heat Indicator Assembly StepLocate these parts Hardware BagLocate these parts Assembly StepTools needed CrimpALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE Connecting the LP TankFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE Connecting the LP Tank - ContinuedFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY Checking for LeaksOperating Instructions Pre-Use ProceduresAdding Water Cooking TipCooking Tips - Flavoring Wood Adding Wood / CharcoalMatch Lighting Lighting Procedure Ignitor Lighting SystemCooking Tip - Damper Adjustments Shutting the Smoker OFFCooking Instructions You Are Now Ready to Begin Here is a chart for measuring properly cooked meat temperature Temperature ChartUSDA Standard Care and Maintenance After Use Safety and MaintenanceMonday - Friday, 900 a.m. - 500 p.m. EST Manufacturer’s Limited WarrantyPage “there’s nothing like the great outdoors.” Statement of CommitmentPatents Pending USA CFM Corporation2695 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 8A3