3Initial installation
Setting TV channels, date and time for the first time
AUTOINSTALL
YOUR VIDEO RECORDER
IS NOW SEARCHING FOR ALL AVAILABLE TV CHANNELS
01 TV CHANNELS FOUND hhhh_______________
PLEASE WAIT
AUTOINSTALL
AUTOINSTALL COMPLETE 32 TV CHANNELS FOUND
TO EXIT
PRESS MENU
If your TV set supports the Easylink function and you have already corrected and/or confirmed the settings for year, month, date and time, you can skip this section.Your video recorder has already stored all the necessary details. Please continue by reading the section “Searching for a TV channel manually”.
1Using the OK button activate the automatic initial installation
“Aim” correctly |
|
Always point the remote control at the video recorder | TIP |
and not at the TV set. |
2The set seeks out and stores all available TV channels as well as time and date. This procedure may take several minutes
The Teletext clock resets automatically |
|
If a TV channel which has Teletext is stored as |
|
programme number P01, the video recorder |
|
automatically takes in the date and time from the text |
|
function.The change from summer to winter time and | TIP |
vice versa should also occur automatically. |
3The initial setting of channel, date and time is completed.
8The time is not shown in the display of the video recorder
4While initial installation was going on, the set was unable to recognise the time. Please read the paragraph in Section 4 “Setting the time and
date” to correct this problem | PROBLEM |
|
SETTING TV CHANNELS, DATE AND TIME | 10 | ENGLISH |
|
