Problem solving (VIDEO Plus-Programming)
PROBLEMSOLUTION
A correct PlusCode programming number has been entered - but automatic
Error message:recognition of the correct TV channel has failed. Please enter the programme “PLUSCODE NUMBER Ä
the buttons 0-9 and confirm with OK.
Error message:
“PLUSCODE NUMBER WRONG”
Error message:
“WEEKEND PROGRAMMING NOT POSSIBLE”
Error message:
“SWITCH TO STANDBY - TIMER RECORDING”
Error message:
“NO CASSETTE”
The Pluscode programming number entered is incorrect. Please repeat the entry or finish with the button STANDBY/ON m.
The attribute
A recording was programmed, but the video recorder was not switched into
timer mode with the Standby button m. Press STANDBY/ON m, in order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.
A recording was programmed, but there is no cassette in the machine. Insert a cassette without erase protection ready for recording.
Error message:
“MEMORY FULL”
“k” and/or “v” are flashing in the display of the video recorder
All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete a programmed recording”).
A recording was programmed, but there is no cassette in the machine. Insert a cassette without erase protection ready for recording.
A recording was programmed, but the video recorder was not switched into
timer mode with the Standby button m. Press STANDBY/ON m, in order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.
Cassette is ejected after programming
Cassette is ejected during recording
The set cannot be used during recording.
Year/month/date/time screen appears
A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.
The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.
Once started, a recording can only be interrupted by pressing the STANDBY/ON button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly. After entering/confirming year, month, date and time you can continue programming.
ENGLISH | 41 | PROBLEM SOLVING (VIDEO |
|
