Manuals / CFM Corporation / Outdoor Cooking / Smoker

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Hardware, Tools needed

Models: 3405BG

1 28

Download 28 pages 36.26 Kb

Page 7

Image 7

3.Insert the two (2) remaining bolts and tighten them securely .

Assembly Step 3

Locate these parts:

Control Panel

Assembly

Hardware:	Hardware Bag A

1/4-20 x 5/8” Bolts

(2 remaining from previous step)

1.Place the control panel assembly between the front legs as shown. There are slots on the control panel that ﬁt around the legs. The mounting tabs ﬁt to the inside of the legs and line up with the bolt holes.

2.Be sure all the tabs on the back side of the control panel are cap- tured around the legs as shown below.

3.Insert the two (2) remaining bolts and tighten them securely .

Tools needed:

Phillips head screwdriver

Page 7

Image 7

CFM Corporation 3405BG owner manual Assembly Step, Locate these parts, Hardware, Tools needed

Contents

CONSUMER / USER Assembly and Owner’s ManualASSEMBLER / INSTALLER Gas SmokerContinued READ ALL INSTRUCTIONS AND WARNINGSOPERATING YOUR SMOKER USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR SMOKERREAD ALL INSTRUCTIONS, WARNINGS AND SAFEGUARDS BEFORE ASSEMBLING AND SAVE THESE INSTRUCTIONSDO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST Assembly Step 1 - Identifying the partstoll-free customer service line to order parts DO NOT RETURN YOUR SMOKER TO THE RETAILER - CALL US FIRST Identifying the parts - ContinuedLP tank and ﬂavoring wood not included Tools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts HardwareTools needed Assembly StepLocate these parts Hardware1. Insert the wood box rack into the bottom of the smoker Assembly StepLocate these parts No tools or hardware are required for this stepLocate these parts Assembly StepWater Pan Cooking Grids 1. Slide the handle washer onto the end of the door handle, followed by the handle spring Assembly StepLocate these parts Tools neededHardware Bag Assembly Step2 Push Nuts Nameplate w/Heat Indicator Locate these partsCrimp Assembly StepLocate these parts Tools neededALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE Connecting the LP TankFOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURY Checking for Leaks Connecting the LP Tank - ContinuedALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND / OR INJURYCooking Tip Pre-Use ProceduresOperating Instructions Adding WaterCooking Tips - Flavoring Wood Adding Wood / CharcoalMatch Lighting Lighting Procedure Ignitor Lighting SystemCooking Tip - Damper Adjustments Shutting the Smoker OFFCooking Instructions You Are Now Ready to Begin Here is a chart for measuring properly cooked meat temperature Temperature ChartUSDA Standard Care and Maintenance After Use Safety and MaintenanceMonday - Friday, 900 a.m. - 500 p.m. EST Manufacturer’s Limited WarrantyPage “there’s nothing like the great outdoors.” Statement of CommitmentPatents Pending USA CFM Corporation2695 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 8A3