Gas Fireplace Insert
A4 Riser Kits
For use with A125
1.Install the unit according to Homeowner’s Manual.
2.Install the trim according to Installation Instructions.
3.Remove the two (2) screws at the bottom of the trim.
4.Install the riser at the bottom of the trim. (Fig. 37)
5.Fasten the trim with the same two (2) screws re- moved in Step 3.
Riser Trim Dimensions
| Length - A | Height - B | Depth - C |
1" (25.6mm) | 2.86" (72.8mm) | ||
2" (50.9mm) | 2.89" (73.6mm) | ||
5" (127.9mm) | 2.86" (72.8mm) | ||
|
|
| Trim Kit |
| Riser |
|
|
| Decorative |
|
|
| Trim |
|
|
| A |
| B |
FP1276 |
|
| C |
Fig. 37 | RHEBSL, RHEBXL trim kit. |
|
B Trim Options for A132
B1 RHESS, RHESL, RHESSD, RHESLD, &
RHESXL Trims
For use with A132
Frame Assembly
10/24 Screws
Frame Top
| 10/24 Nuts |
Left | Right Frame |
Frame | |
| FP1259 |
Fig. 38 Attache left and right frame to frame top.
3.Install the trim top deflector and use two (2) screws to fasten it. (Fig. 39 & 40)
4.Remove ALL plastic protective covering from brass trim.
| Trim Top |
|
| Channel |
|
Trim |
|
|
Side |
| Trim |
Channel | Side | |
| Deflector | Channel |
| Trim Top |
|
Screw |
|
|
|
| FP1260 |
Fig. 39 | Install trim channels and trim top deflector. |
|
Side View
Trim Top Deflector
RHESS, RHESL, RHESSD, RHESLD and RHESXL
FP1261a
Trim Frame Top Section
1.Lay trim top facing and trim side facings, face down on to an even surface such as a table or floor. Be sure not to scratch the painted surfaces.
2.Install the nuts and bolts. (Fig. 38)
Trim Assembly
RHESS, RHESL and RHESXL (Fig. 39)
1.Install trim channels (left and right sides). Use two
(2) screws to assemble each piece.
2.Slide on the trim top channel and fasten it from the back side.
Fig. 40 Trim top deflector.
RHESSD and RHESLD (Fig. 41)
1.Install trim channels (left and right sides). Use two
(2) screws to assemble each piece.
2.Peel off plastic protective covering from top edges of the inner sides where they will be covered by the inner top trim facing.
3.Place the trim facing inner top in place (do not fasten it yet). Peel off the plastic protective covering from the bottom edge.
24 | 10002964 |