ASSEMBLY STEP 2

For Sectional and One-Piece Doors Only Install the Trolley

•Attach the trolley threaded shaft to the trolley with the lock washer and nuts as shown.

•As a temporary stop, insert a screwdriver into the hole in the front end of the rail.

•Slide the trolley assembly along the rail to the screwdriver stop.

NOTE: If trolley hits against any nuts on the rail, the bolts and nuts were attached from the wrong side and must be repositioned. Review Assembly Step 1.

Temporary Stop

Screwdriver

HARDWARE SHOWN ACTUAL SIZE

 

Lock Washer

Nut

 

5/16"

5/16"-18

 

Inner Nut

 

Lock Washer

5/16"

 

 

 

5/16"

Trolley

 

Outer Nut

 

Threaded

 

5/16"

Shaft

 

Trolley

ASSEMBLY STEP 2

For Sliding and Swinging Gates Only Install the Trolley

•Attach the trolley threaded shaft to the trolley with the lock washer and nuts as shown.

•Insert a hex bolt into the hole in the front end of the rail.

•Slide the trolley assembly along the rail until it rests against the hex bolt (trolley stop).

NOTE: If trolley hits against any nuts on the rail, the bolts and nuts were attached from the wrong side and must be repositioned. Review Assembly Step 1.

Hex Bolt 5/16"-18x7/8"

Hex Bolt Trolley Stop

Lock Washer 5/16"

Nut 5/16"-18

HARDWARE SHOWN ACTUAL SIZE

Hex Bolt

Nut

Lockwasher

5/16"-18x7/8"

5/16"-18

5/16"

Inner Nut

 

 

5/16"

Trolley

 

Outer Nut

Threaded

 

Shaft

 

5/16"

 

 

 

 

Lock Washer

 

 

5/16"

 

 

 

Chain Pulley

 

 

Bracket

11