Operation
-10- Q-Spot™ 160-LED User Manual R ev. 01b
Continued from previous page
a) Select any suitable Auto or Sound program.
b) Activate the selected AUTO or SOUND program.
2) On each of the slave units, go to Intro > Operation.
a) Select Slav e.
b) Activate the SLAVE mode or r eturn to the previous level .
1) Go to Intro > Display.
2) Select
60 Close (the backlight will turn of f aft er 60 seconds of control panel inacti vi t y) or
Bright (the backlight will stay on permanently).
3) Activate the selected backlight operation or r eturn to the previous lev el.
1) Go to Intro > Info.
2) Select Ed ition (the firmware version will show on th e dis p lay).
3) Accept or return to the previous l evel .
Fixture Reset
1) Go to Intro > Reset.
2) Select
Yes (all custom modifications wi ll b e lost ) or
No (all custom modific ations will remain).
3) Accept or return to the previous l evel .
1) Go to Special > Reset .
2) Select
DMX (the fixture will accept reset commands f rom the DMX controller) or
System (the fixture will only reset fr om the control panel).
3) Accept or return to the previous l evel .
1) Go to Special > Black .
2) Select
No (move-in-black will stay active f or as l ong as the Control channel remains
between 020~039) or
Yes (move-in-black will activate p erm an ent ly if the Control channel remains
between 020~039 for 3 seconds.
3) Accept or return to the previous l evel .
Once Move-in-Black is permanently active, i t w il l de activate if the Control c ha nne l
remains between 040~059 for 3 seconds.
Continues on the next page