Operation
Q-Spot™ 160-LED User Manual R ev. 01b -11-
Continued from previous page
2) Set the start point of the PAN movement.
a) Select P/Start.
b) Select a value (000~255).
c) Activate the new valu e.
3) Set the end of the PAN movement.
a) Select P/Fin ish.
b) S elect a value (000~255).
c) Activate the new value.
4) Set the start point of the TILT movement.
a) Select T/Start.
b) S elect a value (000~255).
c) Activate the new value.
5) Set the end of the TILT mov ement.
a) Select T/Finish.
b) S elect a value (000~255).
c) Activate the new value.
6) Activate/disable the movement ranges.
a) Select Use.
b) S elect
No (full range movement) or
Yes (limited range movem ents).
c) Activate the new settin g.
1) Go to Invert.
2) Reverse the directi on of the PAN movement (5 40º~0).
a) Select Pan.
b) S elect No (0~540º ) or Yes (540~0º).
c) Activate the new s etting.
3) Reverse the direction of the TILT movement (270º ~0).
a) Select Tilt.
b) S elect
No (0~270º) or
Yes (270~0º).
c) Activate the new s etting.
4) Change the way the CO LOR wheel rotates.
a) Select Color.
b) S elect
Step (the color wheel jumps f rom one color to the next) or
Linear (the color wheel r otates smoothly from on e color to the next to allow for
rainbow effect s).
c) Activate the new settin g.
5) Activate/disable the mov em en t m odif ic ations.
a) Select Use.
b) S elect
No (use normal settings ) or
Yes (use modified setti ngs)
c) Press <E NTER> to activate the new set ting.
Continues on the next page