Installation Instructions

CM2C40

7.While maintaining dimensions referenced in figure 15, mark base plate mounting hole locations. (See figure 16)

8.Drill pilot holes at marked locations.

9.Mark four side bracket mounting hole locations if applicable. (See figure 16)

10.Drill four pilot holes at marked locations.

11.Secure base plate to structure using either two (wall mount)

or six (ceiling mount) 5/16" flat washers and two or six six

5/16" x 2 1/2" lag screws.

(See figure 16)

12.Secure side brackets, if applicable, to studs using four 5/16" flat washers and four 5/16" x 2 1/2" lag screws.

(See figure 16)

 

X6

8

9

 

12

12

 

 

10

 

X4

 

X4

 

11

 

13

Figure 16

13. Connect mount power cord to outlet.

Figure 17

Display Installation

WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY CAN LEAD TO SERIOUS PERSONAL INJURY OR AMAGE TO EQUIPMENT! It is the installers responsability to ensure the total amount of weight placed on the mount does not exceed 190lbs (86.18 kg) the maximum capaity of the CM2C40.

WARNING: PINCH HAZARD! FINGERS OR HANDS BETWEEN MOVING PARTS CAN LEAD TO SEVERE PERSONAL INJURY! Keep fingers and hands away from mount when operating.

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Displays can weigh in excess of 40 lbs (18.1kg). ALWAYS use two people and proper lifting techniques when installing display.

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make sure mounting buttons on display are properly seated in mounting holes in faceplate.

To install display:

1.Lower lift using the remote control provided.

2.While supporting both sides of display, align four mounting buttons on display or interface bracket with four mounting holes in faceplate. (See figure 18) and (See figure 19)

3.Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes and "click lock" mechanism has engaged. (See figure 18) and

(See figure 19)

1

 

3

1

2

 

Figure 18:

11

Page 11
Image 11
Chief Manufacturing CM2C40 installation instructions Display Installation