Chief Manufacturing CM8 installation instructions Concrete Installation

Installation Instructions

1b

3

5

4

1	2	Concrete Installation
		NOTE: Mount the wall bracket in four spots, spaced a
	x 4	minimum horizontal distance of 12" (30.5cm).

1.Level wall bracket (B) and mark locations of pilot holes.

1/2" x 2-1/2" (12.5mm x 63.5mm) 2. Drill four 1/2" x 2-1/2" (12.5mm x 63.5mm) pilot holes into

mounting surface.

(H4) x 4

3.Install four anchors (H4) into pilot holes, inserting end that

opens slightly first. Tap with hammer until flush with concrete surface.

4. Using a socket wrench, install four 5/16" x 2-1/2" hex head lag screws (H2) and four 5/16" flat washers (H1).

5. Slide latches to outside.

5

(H1) x 4

(H2) x 4

7