Configure Your FuzzyScan

Program & End

Scan

“PROGRAM”

FuzzyScan will enter programming mode, and inhibit all non-programming functions.

Scan

“END”

FuzzyScan will exit programming mode, and store all

parameters in Flash Memory ASIC or non-volatile memory,

then issue the completion beeping.

System List, Group & Master Default

Scan

“SYSLIST”

FuzzyScan will list the product information and

revision number to host via selected host interface,

then issue the completion beeping.

Scan

“M_DEFAULT”

FuzzyScan will recover all programmable

parameters into factory preset configurations,

then issue the completion beeping.

Reference Manual

Wireless FuzzyScan

Please note that the FuzzyScan will take 3-4 seconds to store parameters in internal Flash Memory ASIC or non-volatile memory after you scan the “END”. Please don’t turn off the power before the completion beeping. It may destroy all configured parameters.

15