Reference Manual

Wireless FuzzyScan

Getting Started

Preparation before Using

Install the Battery

Ensure the battery contacts of the battery pack are facing the charging contacts inside the battery cavity.

Slide the battery pack into the battery cavity until hearing a click sound before locking it with the end cap. The scanner will give 4 beeps when the battery pack is installed properly if the battery pack still has power.

Secure the end cap with the screw provided, and make sure the end cap is secured properly before using the scanner.

Charging the Battery

There are 4 different power plugs in your power supply kit. Choose the appropriate local plug and slot it onto the power adapter cavity until it is locked.

Plug the AC power plug into the appropriate AC wall socket.

Plug the DC power cord of the power supply unit into the DC power jack of the cradle. The smart cradle will issue the power on beeps and the center indicator will give one blue blink. If you use the charging cradle, please check the power indicator of the charging cradle turns steady blue.

Place the scanner on the cradle. The status indicator of scanner will turn steady red if the battery is not fully charged. When the battery is fully charged, the status indicator of scanner will flash green at regular interval.

Please charge the new battery pack for 8 hours prior to the first use.

2