Configure Your FuzzyScan

Operation Control

♦ Operation Mode ♦

PROGRAM

 

 

F_DEFAULT

 

 

 

 

Family Code Selection

P.C

Parameter Selection

Option Code

Operation Mode

SS

Trigger mode ￿

1

 

 

 

 

SS

Presentation mode

2

 

 

 

 

￿Trigger Mode (Low Power Triggering) The scanner goes into standby state after scanning the bar code. You must press the trigger to turn on the light source of the scanner before scanning the bar code.

￿Presentation Mode (Auto Detection) Presentation mode uses ambient light to detect the bar codes. The light source is off until the scanner detects an image which is similar to a barcode. Then the light source turns on automatically to read the bar code. If the light level in the room is not high enough, Presentation Mode may not work properly. You can choose different level of “Presentation Sensitivity” to meet your application (Please refer to the setting of “ Presentation Sensitivity”).

Reference Manual

Wireless FuzzyScan

50