Cisco Systems 15.3.00P1 manual Installing Patch, Backing Up the Existing Database, page

Installing and Uninstalling CWM 15.3.00 P1

the HELLO_EVENT_INTERVAL value times the EVENT_REDELIVERY_COUNT value. The range for HELLO_EVENT_INTERVAL is 0 through 600, and the default is 60. The range for EVENT_REDELIVERY_COUNT is 0 through 10, and the default is 3. The default for the NMSERVER_DISCONNECT_TIMEOUT parameter is 60 times 3, or 180.

If you change any of these parameters, they must be adjusted so the HELLO_EVENT_INTERVAL value times the EVENT_REDELIVERY_COUNT value continues to equal the NMSERVER_DISCONNECT_TIMEOUT parameter value.

The Network Monitor Server configuration file (NMServer.conf) also contains the

PERIODIC_RESYNC_INTERVAL parameter. This parameter defines the interval in hours between periodic resyncs. The range is 2 through 24, and the default is 8. You can also disable the periodic resync feature by setting the PERIODIC_RESYNC_INTERVAL parameter to 0.

Installing Patch 1

This section describes how to install the CWM 15.3.00, Patch 1 (CWM 15.3.00 P1). Refer to these sections:

•Backing Up the Existing Database, page 37

•Installing the CWM Server Patch, page 37

•Verifying and Restoring Your Saved Database, page 39

•Installing the CWM SNMPAgent (ServiceAgent) Patch, page 40

•Installing the SSC Patch, page 41

•Installing the SSM Patch, page 41

•Installing the RTM Proxy Patch, page 42

Table 22 lists the contents of the Patch 1.

Table 22	CWM 15.3.00 Patch 1 Contents
Component		File
CWM		15.3.00-P1_CWM.tar.gz
SNMP Agent		15.3.00-P1_SNMPAgent.tar.gz
SSC		15.3.00-P1_SSC.tar.gz
SSM		15.3.00-P1_SSM.tar.gz
WANDEST Server 2.7.00, Patch 1		wandest2.7.00-P1_wdserver.tar.gz
WANDEST Client 2.7.00, Patch 1		wandest2.7.00-P1_wdclient.tar.gz
RTMProxy		15.3.00-P1_RTMProxy.tar.gz
Note Install this on the CWM Server only
if you are using SSM, but not using
the SNMPAgent. See Installing the
RTM Proxy Patch, page 42.

	Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
36	OL-11190-01, Rev. C0