Cisco Systems 15.3.00P1 manual Installing WANDEST 2.7.00, Patch

Installing WANDEST 2.7.00, Patch 1

#Running Guard process ... as svplus

echo "Running Guard process" >> /usr/users/svplus/log/.start_stopCWM.log su - svplus -c /usr/users/svplus/scripts/Install/RunGuard &

#Start CWM core process ... as svplus

su - svplus -c /usr/users/svplus/scripts/start_SV+ &

******************************************************************

Note To save your changes while using the vi editor, press Esc, colon (:), then wq!.

Step 5 Provide execute permissions for /etc/rc3.d/S99init_sv by executing this command:

# chmod 755 S99init_sv

To auto restart Informix after reboot, a shell script has been created automatically during the initial CWM installation. This script is called /etc/rc3.d/S98init_db. You need to make sure that the filename of your newly created autorestart shell script has a script number (the second and third characters in the filename) greater than 98. Also, your newly created autorestart shell script cannot have the same script number as any other script files in /etc/rc3.d.

For more information on configuring this feature, refer to the /etc/init.d/README file.

Installing WANDEST 2.7.00, Patch 1

If you have standalone WANDEST server and client workstations, follow the procedures in these sections to install and uninstall the patches:

•Installing the WANDEST Server Patch, page 45

•Installing the WANDEST Client Patch, page 45

•Uninstalling Patch 1, page 43

Table 22 lists the contents of WANDEST 2.7.00, Patch 1.

Table 23 WANDEST 2.7.00, Patch 1 Contents

Component	File
WANDEST Server	wandest2.7.00-P1_wdserver.tar.gz
WANDEST Client	wandest2.7.00-P1_wdclient.tar.gz

	Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
44	OL-11190-01, Rev. C0