Cisco Systems 15.3.00P1 Verifying and Restoring Your Saved Database, PHYSDBS phydbs, Physfile

Installing and Uninstalling CWM 15.3.00 P1

Verifying and Restoring Your Saved Database

If Informix did not come back online after restarting the CWM, use this procedure to restore the database you saved before you installed Patch 1.

(The output of onstat –d is in /usr/users/svplus/<dbexport-location>/onstat.out for reference. For example, /usr/users/svplus/DBExports153/ where <dbexport-location> is DBExports153.)

Step 1 Log in to the workstation as root:

# su

Step 2 Go to the /usr/users/informix92/etc directory:

# cd /usr/users/informix92/etc

Step 3 Follow these steps only if you have configured a separate raw partition for the Informix physical log:

a.Open the onconfig file for editing:

# vi onconfig

b.Change this line:

PHYSDBS phydbs

to this:

PHYSDBS rootdbs

c.Change this line:

PHYSFILE <size>

to this:

PHYSFILE 20000

d.Save the onconfig file and exit from the editor.

Step 4 Go the /usr/users/svplus/scripts/Install directory:

# cd /usr/users/svplus/scripts/Install

Step 5 Run these commands in the order shown below:

#./dbmode

#./dbinit

#./dbonmode

#./dbonspace

Step 6 If you have the file AddPhyLog in /usr/users/svplus/scripts/Install, do these steps:

#./AddPhyLog

#./RestartInf

Step 7 If you have the file dbaddchunk in /usr/users/svplus/scripts/Install, do these steps:

# ./dbaddchunk

Step 8 Exit from root.

Step 9 Check if you have configured separate partition for datadbs by using the onstat –dcommand:

# onstat -d

Step 10 If a separate partition exists, execute these commands to import the database. If no separate partition exists for datadbs, go to Step 11:

#dbimport stratacom -d datadbs -i <dbexport-location>

	Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0		39