Cisco Systems 15.3.00P1 System Requirements, CWM Server Requirements, Informix Requirements, page

System Requirements

System Requirements

This section describes the system requirements for using the CWM:

•CWM Server Requirements, page 3

•Java Client Requirements, page 4

•Standalone Statistics Manager Requirements, page 4

•Solaris Patch Requirements, page 6

•HP OpenView Requirements, page 7

•Informix Requirements, page 7

In addition to the CWM platform requirements listed in the Cisco WAN Manager Installation and Configuration Guide, Release 15.3.00, consider also the following:

•UltraSPARC II, UltraSPARC III, and UltraSPARCIIIi workstations—The CWM is compatible with them. For system requirements, see Tables 2 through 5.

•Ultra 60 and Enterprise 450 and 4500—They were certified with earlier CWM releases and can still be used with this release. For the certified system requirements, see the CWM 11.0.10 release notes. Cisco does not provide technical support for Sun configurations or products that Sun Microsystems no longer supports.

•Graphics card—A graphics card is required when using the Java Client to access to the CWM.

•Video—Video on the CWM server is required only for user access or maintenance. It can be added to Sun servers or workstations. For Ultra and Enterprise, a video adapter is required.

•Firewalls—If you are using a firewall between the server and the clients, you must open a range of ports for the CWM servers. For additional information about using firewalls, see the “Using Firewalls” section in the CWM installation guide. You can access all CWM documentation at this website:

http://www.cisco.com/en/US/products/sw/netmgtsw/ps2340/tsd_products_support_series_home.ht ml

CWM Server Requirements

Table 2 lists the system requirements for the CWM server. Note also the following about the

CWM servers:

•Other UltraSPARC III server models with equal or higher CPU speed and memory capacity can also be used.

•If UltraSPARC II servers are used, see the CWM 11.0.10 release notes for system requirements.

•If you are using an Ultra 60 (low-end platform), it should have at least 2 GB of RAM.

	Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0		3