Cisco Systems 15.3.00P1 manual Installing the CWM SNMPAgent ServiceAgent Patch

Installing and Uninstalling CWM 15.3.00 P1

#dbimport statsdb -d datadbs -i <dbexport-location>

#dbimport scmdb -d datadbs -i <dbexport-location>

Step 11 If no separate partition exists for datadbs, do these:

#dbimport stratacom -i <dbexport-location>

#dbimport statsdb -i <dbexport-location>

#dbimport scmdb -i <dbexport-location>

Step 12 If you had WANDEST server before, execute this command:

# dbimport wandest -i <dbexport-location>

Installing the CWM SNMPAgent (ServiceAgent) Patch

Use this procedure to install the CWM SNMPAgent (ServiceAgent) patch.

Step 1 Log in to the CWM server as user root:

# su

Step 2 Stop the core.

Step 3 Download or copy the compressed tar file for ServiceAgent to the local directory, such as /tmp:

# cp 15.3.00-P1_SNMPAgent.tar.gz /tmp

Step 4 Change to local directory that contains the compressed tar files:

# cd /tmp

Step 5 Remove the disk1 directory if it exists:

# rm -rf disk1

Step 6 Decompress the compressed tar file and untar the tar file:

#gunzip 15.3.00-P1_SNMPAgent.tar.gz

#tar xvfp 15.3.00-P1_SNMPAgent.tar

Step 7 Execute the installation patch script:

# ./InstallAgent153Patch1.csh

This message appears:

Console Mode Option is recommended when you cannot connect to X Server from current terminal (See if you can open an xterm to check!)

Do you Want to Launch Installer in Console Mode? (Yes / No): [No]:

Step 8 To continue the installation using the InstallShield GUI, respond No.

To continue the installation using Console Mode Install, respond Yes.

Step 9 When prompted, follow the instructions that the application provides.

Step 10 When you have finished installing the SNMP Agent Patch software, exit from root.

	Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
40	OL-11190-01, Rev. C0