Manuals / Cisco Systems / Lawn and Garden / Weather Radio

Cisco Systems 1500 Series Mounting the Access Point on a Vertical or Horizontal Surface, 2-15

Models: 1500 Series

1 24

Download 24 pages 1.5 Kb

Page 15

Image 15

Chapter 2 Mounting Instructions

Mounting the Access Point

C i s c o C o n f i d e n t i a l - D r a ft 1

Mounting the Access Point on a Vertical or Horizontal Surface

To mount the access point on a vertical or horizontal surface such as a wall or a roof-overhang, use the supplied mounting plate. For the correct access point mounting orientations, refer to the “Access Point Mounting Orientations” section on page 2-12.

Step 1 The mounting plate is attached to the access point by two carriage bolts. Refer to Figure 2-6for the location of the carriage bolts securing the mounting plate.

Figure 2-6 Access Point Mounting Plate and Carriage Bolts

170061

Mounting plate

3 Grounding screw hole

Carriage bolts

Step 2 Remove the nuts and washers from the carriage bolts and remove the carriage bolts.

Step 3 Remove the mounting plate from the access point.

Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

	OL-9977-05	2-15

Page 15

Image 15

Cisco Systems 1500 Series manual Mounting the Access Point on a Vertical or Horizontal Surface, 2-15

Contents

C i s c o C o n f i d e n t i a l - D r a ft Unpacking the Access Point, page Tools and Materials, pageWarnings, page Safety Information, page Installation Guidelines, page Mounting the Access Point, pageC i s c o C o n f i d e n t i a l - D r a ft Unpacking the Access PointPackage Contents Tools and MaterialsC i s c o C o n f i d e n t i a l - D r a ft Safety InformationWarnings SAVE THESE INSTRUCTIONSFCC Safety Compliance Statement Safety PrecautionsC i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft Avoiding Damage to Radios in a Testing EnvironmentInstallation Guidelines Site SurveysC i s c o C o n f i d e n t i a l - D r a ft Before Beginning the Installation Becoming Familiar with Access Point Installation ComponentsC i s c o C o n f i d e n t i a l - D r a ft Building roof-overhang C i s c o C o n f i d e n t i a l - D r a ft5.8-GHz antenna bracket LAP1510 model C i s c o C o n f i d e n t i a l - D r a ftStep 3 Check Enable Zero Touch Configuration Adding the Access Point MAC Addresses to the Controller Filter ListEnabling Zero Touch Configuration on the Controller Step 2 Choose WIRELESS MESH2-11 Mounting the Access PointConfiguring a RAP Installation OptionsRoof-Overhang Installation, page Access Point Mounting OrientationsAccess Point Mounting Orientations, page Mounting the Access Point on a Vertical or Horizontal Surface, pageFigure 2-4 Preferred Horizontal Orientation 2-13Chapter 2 Mounting Instructions Mounting the Access Point C i s c o C o n f i d e n t i a l - D r a ft2-14 Figure 2-5 illustrates the access point vertical orientationC i s c o C o n f i d e n t i a l - D r a ft Mounting the Access Point on a Vertical or Horizontal Surface 2-15C i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft Roof-Overhang InstallationStep 7 Continue with the “Roof-Overhang Installation” section 2-16C i s c o C o n f i d e n t i a l - D r a ft Mounting the Access Point on a PoleStep 7 Continue with the “Grounding the Access Point” section on page 2-172-18 Figure 2-8 Adjustment Plate Attached to the Mounting PlateC i s c o C o n f i d e n t i a l - D r a ft 2-19 Figure 2-9 Pole Clamp and Clamp Adjustment Plate Mounted on a PoleC i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft 2-20Step 7 Continue with the “Grounding the Access Point” section on page Figure 2-10 Access Point Attached to the Pole ClampC i s c o C o n f i d e n t i a l - D r a ft Grounding the Access PointStreetlight Pole Installations 2-21C i s c o C o n f i d e n t i a l - D r a ft 2-222-23 Figure 2-11 Using the Streetlight Power Tap AdapterC i s c o C o n f i d e n t i a l - D r a ft What to Do Next 2-24C i s c o C o n f i d e n t i a l - D r a ft