Chapter 2 Mounting Instructions
Safety Information
C i s c o C o n f i d e n t i a l - D r a ft 1
FCC Safety Compliance Statement
The FCC, with its action in ET Docket
Safety Precautions
Warning In order to comply with radio frequency (RF) exposure limits, the antennas for this product should be positioned no less than 6.56 ft (2 m) from your body or nearby persons. Statement 339
Warning The AC power supply has double pole/neutral fusing. Statement 188
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Warning This equipment has been designed for connection to TN and IT power systems. Statement 1007
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits, because they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052
Caution No serviceable parts inside. Do not open.
Caution Double pole/neutral fusing. The power supply has two fuses and might have live circuits even when one fuse has blown.
Note For additional important safety instructions for AC power cords, refer to the AC Power Cords for Cisco Aironet 1500 Series Outdoor Mesh Access Points document that shipped with your AC power cords.
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
| ||
|