Manuals / Cisco Systems / Lawn and Garden / Weather Radio

Cisco Systems 1500 Series manual 2-19, C i s c o C o n f i d e n t i a l - D r a ft

Models: 1500 Series

1 24

Download 24 pages 1.5 Kb

Page 19

Image 19

Figure 2-9 Pole Clamp and Clamp Adjustment Plate Mounted on a Pole

Chapter 2 Mounting Instructions

Mounting the Access Point

C i s c o C o n f i d e n t i a l - D r a ft 1

Figure 2-9 Pole Clamp and Clamp Adjustment Plate Mounted on a Pole

2-19 142687

Step 4 Adjust the top edge of the pole clamp until it is horizontal and tighten the bolts to 15 to 20 ft. lbs. (20 to 27 Nm)

Note If you need longer bolts, purchase 3/8–16 bolts of the correct length for your installation. Also, the bolts can protrude up to 2 in (5 cm) and still allow the pole mount assembly to swivel and rotate.

Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

	OL-9977-05	2-19

Page 19

Image 19

Cisco Systems 1500 Series manual 2-19, C i s c o C o n f i d e n t i a l - D r a ft

Contents

C i s c o C o n f i d e n t i a l - D r a ft Unpacking the Access Point, page Tools and Materials, pageWarnings, page Safety Information, page Installation Guidelines, page Mounting the Access Point, pageC i s c o C o n f i d e n t i a l - D r a ft Unpacking the Access PointPackage Contents Tools and MaterialsC i s c o C o n f i d e n t i a l - D r a ft Safety InformationWarnings SAVE THESE INSTRUCTIONSSafety Precautions FCC Safety Compliance StatementC i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft Avoiding Damage to Radios in a Testing EnvironmentSite Surveys Installation GuidelinesC i s c o C o n f i d e n t i a l - D r a ft Becoming Familiar with Access Point Installation Components Before Beginning the InstallationC i s c o C o n f i d e n t i a l - D r a ft Building roof-overhang C i s c o C o n f i d e n t i a l - D r a ft5.8-GHz antenna bracket LAP1510 model C i s c o C o n f i d e n t i a l - D r a ftStep 3 Check Enable Zero Touch Configuration Adding the Access Point MAC Addresses to the Controller Filter ListEnabling Zero Touch Configuration on the Controller Step 2 Choose WIRELESS MESH2-11 Mounting the Access PointConfiguring a RAP Installation OptionsRoof-Overhang Installation, page Access Point Mounting OrientationsAccess Point Mounting Orientations, page Mounting the Access Point on a Vertical or Horizontal Surface, pageFigure 2-4 Preferred Horizontal Orientation 2-13Chapter 2 Mounting Instructions Mounting the Access Point C i s c o C o n f i d e n t i a l - D r a ftFigure 2-5 illustrates the access point vertical orientation 2-14C i s c o C o n f i d e n t i a l - D r a ft 2-15 Mounting the Access Point on a Vertical or Horizontal SurfaceC i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft Roof-Overhang InstallationStep 7 Continue with the “Roof-Overhang Installation” section 2-16C i s c o C o n f i d e n t i a l - D r a ft Mounting the Access Point on a PoleStep 7 Continue with the “Grounding the Access Point” section on page 2-17Figure 2-8 Adjustment Plate Attached to the Mounting Plate 2-18C i s c o C o n f i d e n t i a l - D r a ft Figure 2-9 Pole Clamp and Clamp Adjustment Plate Mounted on a Pole 2-19C i s c o C o n f i d e n t i a l - D r a ft C i s c o C o n f i d e n t i a l - D r a ft 2-20Step 7 Continue with the “Grounding the Access Point” section on page Figure 2-10 Access Point Attached to the Pole ClampC i s c o C o n f i d e n t i a l - D r a ft Grounding the Access PointStreetlight Pole Installations 2-21C i s c o C o n f i d e n t i a l - D r a ft 2-22Figure 2-11 Using the Streetlight Power Tap Adapter 2-23C i s c o C o n f i d e n t i a l - D r a ft 2-24 What to Do NextC i s c o C o n f i d e n t i a l - D r a ft