Removing the Cover
Figure 1 Cisco RPS Adapter Plate for Cisco 2600 series Routers
|
|
|
|
|
| consectetuertincidunt | sed | |
|
|
|
|
|
| ut | ||
|
|
|
|
|
|
| . | |
|
|
|
|
| amet, |
| volutpat |
|
|
|
|
| sit | euismoderat |
|
| |
|
|
| dolornibh |
|
|
| ||
WARNING:nonummy | aliquam |
|
|
| ||||
| ipsum |
|
|
|
|
|
| |
Lorem |
| magna |
|
|
|
|
| |
diam |
|
|
|
|
|
|
| |
dolore |
|
|
|
|
|
|
| |
Adapter plate
H9430
To install the Cisco RPS adapter plate, you will also need the following tools and equipment (which are not included):
•
•
•
•
•
Cisco 2600 series router
Antistatic bag (optional)
Wire cutters or scissors for cutting the cable
Removing the Cover
You must remove the chassis cover to access the internal power supply.
Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is OFF and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.
Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit. To ensure that all power is OFF, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.
Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers 5
