Documentation Updates
Table 11 | CMI Service Parameters Not Included in Release 3.0 Documentation (continued) |
| ||||
|
|
|
| |||
ParamName | Description |
|
| |||
|
|
| ||||
InputDnSignificantDigits | This parameter is designed to accommodate the differences between |
| ||||
|
| voice mail mailbox numbers and DNs. If a Legacy voice mail system |
| |||
|
| has mailbox numbers that are longer than the DNs on the system, this |
| |||
|
| parameter can be used to strip the most significant digits. The |
| |||
|
| numeric value of this parameter indicates how many digits should be |
| |||
|
| used. |
|
| ||
|
|
|
|
|
|
|
|
| Note | No provision exists for stripping |
| ||
|
|
|
|
| digits other than leading ones. |
|
|
|
|
|
| ||
|
| Recommended default value: 10 |
| |||
|
|
| ||||
KeepAliveDn | For most voice mail systems, a value of F is acceptable for a string |
| ||||
|
| parameter. However, some Octel systems periodically send an |
| |||
|
| invalid DN specifically for the purpose of verifying that the attached |
| |||
|
| Cisco CallManager is functioning properly. In this case, you can turn |
| |||
|
| off ValidateDns if you know the DN that the Octel system will use |
| |||
|
| as a keepalive. By programming that DN into the KeepAliveDn |
| |||
|
| parameter, you will ensure that the invalid DN message is returned |
| |||
|
| to the voice mail system when needed. |
| |||
|
|
| ||||
OutputDnFormat | Use this parameter to format the DNs sent to the voice mail system. |
| ||||
|
| Most numbers passed to the voice mail system are formatted using |
| |||
|
| this parameter. |
|
| ||
|
| Default value: %010s |
|
| ||
|
|
| ||||
OutputExternalFormat | Use this parameter is to format the DNs sent to the voice mail |
| ||||
|
| system. Calling party DNs that are seven digits or longer are |
| |||
|
| formatted using this parameter. |
| |||
|
| Default value: %010s |
|
| ||
|
|
|
|
|
|
|
| Release Notes for Cisco CallManager Release 3.0(10) |
92 |
