Cisco Systems 3.0(10) manual Documentation Updates

					Documentation Updates
Table 11		CMI Service Parameters Not Included in Release 3.0 Documentation (continued)
	ParamName		Description
	Parity		Cisco CMI connects to the voice mail system via an EIA/TIA-232
			connection. This parameter defines that connection.
			Recommended default value: Even
				Note	The parity settings can be None,
					Even, Odd, Mark, or Space.
					Settings are usually Even and
					None, with Mark and Space
					rarely being used. Just using the
					first character of the parity name
					also works.
	RouteFilter		CMI requires this parameter is one of four required to register an
			intercept for the voice mail system with which CMI is going to work.
				Note	Small systems without a
					complex dialing plan usually
					only need the VoiceMailDn
					parameter. The remaining
					parameters, DialingPlan,
					RouteFilter, and
					VoiceMailPartition, will default
					to empty strings.
	SerialPort		Cisco CMI connects to the voice mail system via an EIA/TIA-232
			connection. This parameter defines that connection.
			Recommended default value: COM1
				Note	The SerialPort name should be
					the same name that you see in
					Device Manager under NT.
				Release Notes for Cisco CallManager Release 3.0(10)
	78-13493-02					93