95
Release Notes for CiscoCallManager Release 3.0(10)
78-13493-02
Documentation Updates
Server Name Change
Changethe CiscoWorks2000 server name by editing the SAenvproperties.ini file
manually,then restarting the Cisco Syslog Collector service. In future releases, an
administrative interface will be available for this purpose.
ValidateDns When CMI receivesincoming lamp commands from the voice-mail
system,it normally validates the DN against the NumPlan table. This
isan attempt to verify that the DN matches an existing DN known to
Cisco CallManager. If the DN is not found in NumPlan, an invalid
DN message is sent to the voice mailbox.
Default value: T
Note On a system with a lot of traffic
to and from the voice mail
system, you may choose to skip
thisvalidation process by setting
the ValidateDns parameter
default to F.
VoiceMailPartition CMIrequires this parameter is one of four required by to register an
interceptfor the voice mail system with which CMI is going to work.
Note Small systems without a
complex dialing plan usually
only need the VoiceMailDn
parameter. The remaining
parameters, DialingPlan,
RouteFilter, and
VoiceMailPartition will default
to empty strings.
Table11 CMI Service Parameters Not Included in Release 3.0 Documentation (continued)
ParamName Description