Documentation Updates
New Service Parameters
Table 9 contains new Cisco CallManager service parameters, with descriptions, that were not included in the Release 3.0(5) Cisco CallManager Administration Guide or the online help for the Cisco CallManager application.
Table 9 Cisco CallManager Service Parameter Updates
| ParamName | Values | Description |
| ||
|
|
|
|
| ||
| CcmPriorityClass | Default: 0 | CcmPriorityClass = 0: | |||
|
|
| Cisco CallManager process runs in | |||
|
|
| normal priority class. | |||
|
|
| CcmPriorityClass = 1: | |||
|
|
| Cisco CallManager process switches | |||
|
|
| between normal and high priority class | |||
|
|
| every second. | |||
|
|
| CcmPriorityClass = 2: | |||
|
|
| Cisco CallManager process runs in high | |||
|
|
| priority class. | |||
|
|
|
|
| ||
| CTINewCallAcce | Default: 4 (seconds) | Specifies timeout interval. Timer ensures | |||
| ptTimeout |
| that, for calls made into CTI ports and | |||
|
|
| CTI route points, the calls are not | |||
|
|
| suspended, so that callers hear only | |||
|
|
| silence; if the CTI application controlling | |||
|
|
| the CTI ports/route points does not | |||
|
|
| handle the call. | |||
|
|
| After the Cisco CallManager notifies the | |||
|
|
| application (using JTAPI/TAPI) of an | |||
|
|
| incoming call at a CTI port or CTI route | |||
|
|
| point, the Cisco CallManager waits for a | |||
|
|
| configurable time for the application to | |||
|
|
| handle the call (as in accept, answer, | |||
|
|
| redirect, or disconnect). If the application | |||
|
|
| does not respond within the set time, | |||
|
|
| Cisco CallManager forwards the call to | |||
|
|
| the call forward busy number configured | |||
|
|
| for the CTI port or CTI route point. If no | |||
|
|
| call forward busy is configured, caller | |||
|
|
| receives a fast busy tone. | |||
|
|
|
|
|
|
|
|
|
| Release Notes for Cisco CallManager Release 3.0(10) |
|
| |
|
|
|
| |||
|
|
|
|
| 83 | |
|
|
|
|
| ||
