Documentation Updates
84
Release Notes for CiscoCallManager Release 3.0(10)
78-13493-02
CTIRequestTimeo
ut Default: 5 (seconds) Specifiestimeout interval. Timerensures
responses to CTI requests are generated
for situations where network or remote
Cisco CallManager node problems
preventthe normal processing of the CTI
requests.
Thistimer services the following specific
CTI requests:
•LINE_CALL_INITIATE_REQUEST
•CALL_ACCEPT_REQUEST
•CALL_ANSWER_REQUEST
•CALL_BLIND_TRANSFER_REQUE
ST
•CALL_DISCONNECT_REQUEST
•CALL_HOLD_REQUEST
•CALL_RETRIEVE_REQUEST
•CALL_SETUP_CONFERENCE_REQ
UEST
•CALL_SETUP_TRANSFER_REQUE
ST
DtSilenceFlag Default: F Designates whether silence plays. When
this flag is set, the digital gateway does
not play silence after receiving the Alert
message. This may enable a full duplex
path before the Connect message is
received on ISDN calls.
Table9 CiscoCallManager Service Parameter Updates
ParamName Values Description