Cisco Systems 3000 Series 2

2 Taking Out What You Need

Follow these steps:

1. Unpack and remove the switch module and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown on page 3. If any item is missing or damaged,

contact your Cisco representative or reseller for instructions.

If the switch modules are ordered with the blade enclosure, they are already installed. The unpacking

procedure for the switch module applies only if you order one separately. See the blade enclosure

documentation for the unpacking procedure for the HP equipment.

Shipping Box Contents

250286

24x

SFP19-20

19-20

21-22

SYST

S-MODE

S-MSTR

S-MMBR

CONSOLE

WS-CBS3120G-S

MODE

UID

SFP 21-22

23x

26x

STK A

STK B

Documentation

Contents

Main GETTING STARTED GUIDE Cisco Catalyst Blade Switch 3000 Series for HP Getting Started Guide 1 2 Shipping Box Contents Cisco Switch Module Descriptions Cisco Catalyst Blade Switch 3120 for HP Page Cisco Catalyst Blade Switch 3020 for HP Port Description Port Description 3 4 Before you install the switch module in the blade enclosure, consider these points: 1 12 : Step 5 Slide the switch module into the bay until it stops. (See Figure 5.) Figure 5 Installing the Switch Module into the Blade Enclosure Interconnect Module Bay 1 5 to the Switch Module and Running Express Setup Page Page Using Express Setup Page Page 6 Using the Device Manager Page Using the Command-Line Interface Using the Onboard Administrator CLI Other Management Options 7 Catalyst Blade Switch 3120 for HP) Stack Cabling Configurations Connecting the StackWise Plus Cables 8 Connect to 10/100/1000 Ports Install and Connect to Devices in the 10-Gigabit Ethernet Slots Verify Port Connectivity 9 Resetting the Switch Module Accessing Help Online For More Information 10