Cisco Systems 3000 Series

Step 4 Using a PC that is connected to the same network segment as the blade enclosure Onboard

Administrator, access the Onboard Administrator in a browser window. Enter your assigned

user name and password.

Step 5 Choose Enclosure Information > Interconnect Bays to open the Interconnect Bay Summary

window where you can find the assigned IP address of the switch module Fa0 interface in the

Management URL column.

Step 6 Click the IP address hyperlink for the switch module from the Management URL column to

open a new browser window.

Step 7 On the left side of the Onboard Administrator, choose Configuration > Express Setup.

The Express Setup page appears (see Figure 6 and Figure 7). (Close or minimize the Device Manager

Help window.)

Contents

Main GETTING STARTED GUIDE Cisco Catalyst Blade Switch 3000 Series for HP Getting Started Guide 1 2 Shipping Box Contents Cisco Switch Module Descriptions Cisco Catalyst Blade Switch 3120 for HP Page Cisco Catalyst Blade Switch 3020 for HP Port Description Port Description 3 4 Before you install the switch module in the blade enclosure, consider these points: 1 12 : Step 5 Slide the switch module into the bay until it stops. (See Figure 5.) Figure 5 Installing the Switch Module into the Blade Enclosure Interconnect Module Bay 1 5 to the Switch Module and Running Express Setup Page Page Using Express Setup Page Page 6 Using the Device Manager Page Using the Command-Line Interface Using the Onboard Administrator CLI Other Management Options 7 Catalyst Blade Switch 3120 for HP) Stack Cabling Configurations Connecting the StackWise Plus Cables 8 Connect to 10/100/1000 Ports Install and Connect to Devices in the 10-Gigabit Ethernet Slots Verify Port Connectivity 9 Resetting the Switch Module Accessing Help Online For More Information 10