Cisco Systems 3550 manual 5 Attaching Brackets for 19-Inch Telco Racks

Chapter 2 Switch Installation

Installing the Switch

Figure 2-5 Attaching Brackets for 19-Inch Telco Racks

2

3

5	Catalyst 3550
4
6		SERIES
	7
	8
	9
	10
		11
		12

19" Configuration

Phillips flat-head screws

Figure 2-6 Attaching Brackets for 24-Inch Telco Racks

2

3

4	Catalyst
5
6	3550	SERIES
	7
	8
	9
	10
		11
		12

24" Configuration

Phillips flat-head screws

74035

74040

Attaching Brackets to the Catalyst 3550-24, 3550-24-DC, 3550-24-FX, 3550-24PWR, and 3550-48 Switches

The bracket orientation and the brackets that you use depend on whether you are attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use bracket part number 700-8209-01; for 24-inch racks, use bracket part number 700-13248-01. Figure 2-7through Figure 2-12show how to attach each type bracket to one side of the switch. Follow the same steps to attach the second bracket to the opposite side.

Note Before you attach the brackets on the Catalyst 3550-24-FX switch, remove the screws that are on the bottom-front of the chassis. Attach the bracket by using the supplied Phillips flat-head screws, as shown in Figure 2-7.

Catalyst 3550 Switch Hardware Installation Guide

2-8 OL-6155-01