Cisco Systems 3700 Series manual A-11, resolve problems immediately

Models: 3700 Series

1 114
Download 114 pages 46.26 Kb
Page 91
Image 91
resolve problems immediately.

Appendix A Troubleshooting

Error Messages

Table A-5 System Error and Recovery Messages (continued)

LED Type

LED Color

Message

 

 

 

System

Amber

Error:

 

 

%PS-3-MULTFAIL: There is more than one failure with the Power System #; please

PS1, PS2,

Amber

resolve problems immediately.

 

LED on

 

Explanation:

power

 

The specified power supply (1 or 2) has experienced multiple failures. This is a critical

supply rear

 

 

condition that must be resolved immediately.

panel

 

 

Recovery:

 

 

 

 

1. Check the power supply LEDs to identify the faulty unit.

 

 

2. Power down the faulty power supply and circuit breaker (for a DC power supply).

 

 

3. Check that cables are seated properly and terminal blocks are wired correctly.

 

 

4. Power up the circuit breaker (for a DC power supply) and the power supply.

 

 

5. If the error condition persists, replace the power supply. See the instructions that ship with

 

 

the new power supply.)

 

 

When the error condition is resolved, the following informational message appears:

 

 

%PS-3-PSOK: Power System is now normal.

 

 

 

Error:

 

 

%FAN-3-FAN_FAILED: Fan # had a rotation error reported.

 

 

Explanation:

 

 

The specified fan is not rotating at the desired speed.

 

 

Recovery:

 

 

Replace the fan cage as described in the Installing Field-Replaceable Units in Cisco 3745

 

 

Routers hardware configuration note.

 

 

When the error condition is resolved, the following informational message appears:

 

 

%FAN-3-FAN_OK: Fan # had earlier reported a rotation error. It is ok now.

 

 

 

Error:

 

 

%OIR-6-REMCARD: Card removed from slot x, interfaces disabled.

 

 

Explanation:

 

 

The online insertion and removal (OIR) function detected the removal of a network module

 

 

processor from the specified chassis slot. The interfaces on that processor are administratively

 

 

shut down and removed. In addition, the routing table is flushed of any routes through the

 

 

removed interfaces.

 

 

For more information, see the online Cisco Network Modules Hardware Installation Guide.

 

 

This is an informational message that does not require any recovery procedure.

 

 

 

Cisco 3700 Series Routers Hardware Installation Guide

 

OL-2180-08

A-11

 

Page 91
Image 91
Cisco Systems 3700 Series manual A-11, resolve problems immediately, PS-3-PSOK Power System is now normal