Cisco Systems 4.2 manual Enable Logging

Chapter 8 Syslog Logging Configuration Scenario

Configuring Syslog Logging

Figure 8-2 Enable Logging Page

Step 4 Check the check box for logging the specified information to syslog.

For example, in Figure 8-2, check the Log to Syslog Failed Attempts Report check box.

In the Select Columns to Log section, a list of the fields available for the specified syslog report appears.

Step 5 To move an attribute to the list of the attributes shown in the report, select the field in the Available column and then click the right arrow icon to move it to the Logged Attributes column.

In the Syslog Servers section, specify the following information for the syslog servers to which ACS will send logging information:

•IP—Enter the IP address of the syslog server.

•Port—Enter the syslog port number on the specified server.

•Max message length (Bytes)—Enter the maximum syslog message length that ACS will accept. You can enter information for up to two syslog servers.

Configuration Guide for Cisco Secure ACS 4.2

OL-14390-02 8-3