Cisco Systems 4.2 manual Map an Audit Server to a Profile, Click Select Audit

Chapter 9 NAC Configuration Scenario

Step 10: Map an Audit Server to a Profile

Step 10: Map an Audit Server to a Profile

To add an external posture validation audit server to a profile:

Step 1 Choose Network Access Profiles.

Step 2 Click the Protocols link for the relevant Posture Validation Policy.

The Protocols Settings page for the policy that you choose opens.

Step 3 Check the Allow Agentless Request Processing check box.

Step 4 Click Submit.

Step 5 Click the Posture Validation link for the relevant profile Posture Validation policy.

Step 6 Click Select Audit.

The Select External Posture Validation Audit Server page opens, as shown in Figure 9-55.

Figure 9-55 Select External Validation Audit Server Page

Step 7 Choose the audit server to use.

Step 8 To specify a Fail Open configuration to use if the audit fails:

a.Check the Do not reject when Audit failed check box.

b.From the Use this Posture Token when unable to retrieve posture data drop-down list, choose a posture token to apply if the audit fails.

c.Enter a timeout value in seconds.

	Configuration Guide for Cisco Secure ACS 4.2
OL-14390-02		9-71