Cisco Systems 4.2 manual Create Profile From Template

Chapter 9 NAC Configuration Scenario

Step 8: Set Up Templates to Create NAPs

To create an agentless host for Layer 3 profile template:

Step 1 In the navigation bar, click Network Access Profiles.

The Network Access Profiles page opens.

Step 2 Click Add Template Profile.

The Create Profile from Template page opens, as shown in Figure 9-50.

Figure 9-50 Create Profile From Template Page

Step 3 Enter a Name and Description (optional).

Step 4 From the Template drop-down list, choose Agentless Host for L3.

Step 5 Check the Active check box.

Step 6 Click Submit.

If no error appears, then you have created a profile that can authenticate Layer 3 NAC hosts. The Edit Network Access Profile page opens, and the new profile is listed in the Name column. The predefined values for the Agentless Host for Layer 3 template include:

•Profile Setup

•Protocols

•A sample posture validation policy

•Authentication policy

Step 7 To select a predefined set of values, click on one of the configuration options.

•The profile name (to select the profile setup page for the profile)

•Protocols

•Authentication Policy

•Sample Posture Validation Rules

	Configuration Guide for Cisco Secure ACS 4.2
9-66	OL-14390-02