Cisco Systems 4.2 manual Configure Access Policy, Before You Begin, Click Access Policy

Chapter 5 Password Policy Configuration Scenario

Step 4: Configure Access Policy

Step 4: Configure Access Policy

This section describes how to configure administrative access policy.

Before You Begin

If you want to enable the SSL for administrator access, you must have completed the steps in Install the CA Certificate, page 7-4, and Add a Trusted Certificate, page 7-4. After you have enabled SSL, ACS begins using the SSL at the next administrator login. This change does not affect current administrator sessions. In the absence of a certificate, ACS displays an error message when you attempt to configure SSL.

To set up an ACS access policy:

Step 1 In the navigation bar, click Administration Control.

ACS displays the Administration Control page.

Step 2 Click Access Policy.

The Access Policy Setup page appears, as shown in Figure 5-4.

Configuration Guide for Cisco Secure ACS 4.2

OL-14390-02 5-9