Cisco Systems 4.2 manual Set Up Global Authentication

Chapter 9 NAC Configuration Scenario

Step 3: Set Up System Configuration

Set Up Global Authentication

In the global authentication setup, you specify the protocols that ACS uses to transfer credentials from the host for authentication and authorization. Unless you have a limited deployment environment or specific security concerns, you should globally enable all protocols. If you do not enable the protocols in the global authorization setup, then they will not be available later in the Network Access Profiles configuration interface.

To set up global authentication:

Step 1 In the navigation bar, click System Configuration.

The System Configuration page opens.

Step 2 Click Global Authentication Setup.

The Global Authentication Setup Page appears, as shown in Figure 9-6.

Configuration Guide for Cisco Secure ACS 4.2

OL-14390-02 9-9