Cisco Systems 4.2 manual Configure Rdbms Synchronization to Use a Local CSV File

Chapter 4 Using RDBMS Synchronization to Create dACLs and Specify Network Configuration

Using RDBMS Synchronization to Configure dACLs

Table 4-2describes the accountActions codes used in Example 4-2to add a User, create a dACL, and associate the dACL with a specified User or Group.

Table 4-2	Account Action Codes to Create dACLs and Assign Them to Specified Users or Groups
Action Code	Name	Required	Description
100	ADD_USER	UNGN, V1	Creates a User (32 characters maximum). The variable V1 is used
			as the initial password. Optionally, you can assign the User to a
			Group.
385	CREATE_DACL	VN	Use this action code to create a dACL.
			VN = <input_file_name>
			where input_file_name is a text file that contains definitions for
			dACLs.
			On ACS for Windows, this file resides in a directory on the
			Windows machine that is running ACS.
			On the ACS SE, this file resides on an FTP server used with the
			ACS SE.
			You can specify the absolute file path; for example:
			C:\DACL\create_DACL_for_User_1.txt for ACS for Windows.
			The dACL definition is ignored if it is already present, or contains
			an invalid definition, content name, content definition, or NAF
			name.
380	CREATE_USER_DACL	UNGN, VN	This action code associates a specified dACL with a User or
			Group. The dACL name specified should be valid and present in
			ACS. The codes are:
			UN = valid Username
			GN = Valid Group name (optional)
			VN = dACL name. (This dACL must be defined in Shared Profile
			Components).

Step 4: Configure RDBMS Synchronization to Use a Local CSV File

To configure RDBMS Synchronization to use a local CSV file:

Step 1 In the navigation bar, click System Configuration.

Step 2 Click RDBMS Synchronization.

Note If this feature does not appear, choose Interface Configuration > Advanced Options, then check the RDBMS Synchronization check box.

The RDBMS Synchronization Setup page appears.

Step 3 If you are using ACS for Windows, complete these steps:

a.Complete the required fields on the RDBMS Synchronization Setup page (Figure 4-1).

Configuration Guide for Cisco Secure ACS 4.2

OL-14390-02 4-5