Cisco Systems 4490 manual LED Indicators, Front Panel LEDs

Chapter 1 Introduction

	Hardware Features
Table 1-1 Front Panel Control Buttons
Item	Description
CD eject button	Releases a CD from the drive.
Power control button	Powers the GSS 4490 on and off.
Reset button	Resets the GSS 4490 and runs the power-on self-test (POST). Use a pen or
	the end of a straightened paper clip to press the button.
	Note This is a hardware reset button and does not restore the device to the
	factory default software settings.

LED Indicators

Figure 1-4shows the location of front panel LEDs, and Table 1-2describes their function.

Figure 1-4 Front Panel LEDs

1 2 3 4

83109

1

3

CD-ROM drive activity	2	System error
Hard disk drive activity	4	Power

	Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-02		1-5